OBDScope is a vehicle On-Board diagnostics software for Symbian S60 smartphones. It works wirelessly with an OBD-II Bluetooth interface which is connected to a vehicle. The software uses the OBD-II Bluetooth interface to access the data available on the ECU of the vehicle. With OBDScope the data can be monitored in real-time and it can be logged to a file for further analysis.


Key features

  • Read diagnostic trouble codes and other diagnostic data
  • Erase diagnostic trouble codes and reset the malfunction indicator lamp
  • Read live data from sensors of the vehicle and view the data with multi gauge display
  • Save sensor data to a file (data logging)
  • Send sensor data to remote server
  • Easy to use user interface supporting 14 languages and fancy touch screen features
  • User extensible enhanced OBD parameter support
  • GPS location support
  • Fuel economy tracking
  • See the detailed list of supported features
  • See the complete list of supported parameters


Version 1.60 available

  • Download OBDScope v1.60. Free of charge for seven days trial period.
  • Update to 1.60 is free of charge
  • Now supporting 14 languages:
  • New feature: Romanian language support
  • New feature: Fuel used gauge
  • New feature: Fuel remaining gauge
  • New feature: Distance to empty tank gauge
  • New feature: Gauges for PIDs 0x53..0x64
  • New feature: USB connection type enabled with Symbian Belle phones
  • New feature: Power down OBDII interface when exiting the application
  • New feature: Swedish DTC descriptions and gauge titles
  • Improvement: More accurate diesel fuel economy tracking
  • Improvement: Increased font size in graph gauge
  • Fix: Connection stability with TX ERROR and DATA ERROR messages
  • Fix: DTCs containing hex numbers were not displayed correctly
  • Fix: Crash when sending Diagnosis SMS
  • Fix: Reading the Vehicle Identification Number (VIN)
  • Fix: Gauge context menu was not available with Symbian Belle phones
  • Recent feature: Engine power gauge
  • Recent feature: Engine torque gauge
  • See the complete version history



The official website of OBDScope is now www.obdscope.com

Features


General


Fault Diagnostics

  • Read diagnostic trouble codes (DTCs)
  • Show detailed description of the DTCs (languages: )
  • Read malfunction indicator lamp (MIL/CEL) status
  • User extensible DTC description database
  • Clear DTCs and reset MIL status *
  • Show Finnish OBD inspection status
  • Read Freeze Frame data
  • Read Fuel system status
  • Read OBD-II Emission test statuses
  • Read Lambda sensors and show the value variation
  • Save diagnostic reports
  • Open previously saved diagnostic reports
  • Send diagnostic reports as SMS
  • Delete previously saved diagnostic reports
  • Save the location information for the diagnosis

Gauges

  • Read live data, available in form of a generic gauge display
  • The data includes: Engine RPM, Vehicle speed, Engine Coolant Temperature, Fuel Economy, OBD Port Voltage, and lots more.
    See the complete list of supported parameters.
  • User defined (enhanced) OBD PIDs support
  • User defined gauge value boundaries
  • Visual and sound Alerts
  • User defined Alert boundaries
  • User defined Colors
  • View min and max values
  • Reset min/max
  • Single or multi gauge display
  • Graph gauge
  • Big font gauge
  • Mirrored Gauge a.k.a. HUD mode
  • Gauge favourites
  • Open a favourite directly at startup
  • Monitor gauges in background
  • Gauge specific decimals setting
  • Up to nine simultaneous gauges with high resolution screen

Data logging

  • Log data to a .csv file that can be opened with any spreadsheet application (OBDScope_example_log.csv)
  • Data items to be logged can be selected individually
  • The data items include the same parameters as with gauges
  • Several Data logging interval settings available
  • Data logging can be run as background task while using other features of the software
  • Data logging can be started automatically once connected
  • Send data to remote server using HTTP POST
  • Download the Remote logging reference server

Advanced User features

  • Command OBD-II Bluetooth interface with low level commands with a Shell User Interface *
  • Save (trace) OBD-II communication to a file


*) Feature available in activated version only.

OBDScope demo
Click the image to view a demo.
Esittelyvideo suomeksi.

Hardware


Supported phones (3rd and 5th editions of S60 platform, Symbian^3, Anna, Belle)

  • Nokia 3250, 5500 Sport, 5700, 6120, 6121, 6290, 6110 Navigator, E50, E51, E60, E61, E61i, E62, E63, E65, E66, E70, E71, E90, N73, N75, N76, N77, N80, N81, N81 8GB, N82, N91, N92, N93, N93i, N95, N95 8GB, E52, E55, E71x, E72, E75, N78, N79, N85, N86 8MP, N96, N97, N97 Mini, 5230, 5233, 5235, 5250, 5320 XpressMusic, 5530 XpressMusic, 5630 XpressMusic, 5730 XpressMusic, 5800 XpressMusic, 6210 Navigator, 6220 Classic, 6650, 6710 Navigator, 6720 Classic, 6730 Classic, 6760 Slide, 6790 Slide, 6790 Surge, X6, X7, E5, E6, E7, C5, C6, C6-01, C7, 5228, 6700, N8, 500, 600, 700, 701
  • Samsung SGH-i400, SGH-i408, SGH-i450, SGH-i458, SGH-i520, SGH-i550, SGH-i550w, SGH-i560, SGH-i568, SGH-i570, SGH-G810, GT-I7110, SGH-L870, i8510, i8910
  • LG KT615 KT610, KS10
  • Sony-Ericsson Satio, Vivaz, Vivaz Pro

Recommended OBD-II Bluetooth interfaces


Supported Vehicles

  • This depends very much on the OBD-II Bluetooth interface being used
  • Most of the passenger cars model 2001 -> with petrol engine
  • Most of the passenger cars model 2005 -> with diesel engine

What do I get when I activate my copy of OBDScope?

Basically all the features are included and enabled already in the trial version. Only the two features listed below are disabled. By activating OBDScope following changes will take place:
  • The 7 day limit will be removed
  • Clearing trouble codes will be enabled
  • The Shell interface will be enabled. Please see User's Guide for more information on the Shell.

How to buy and activate


Buying OBDScope is easy. Just take the following steps and you will have fully functional OBDScope just for 9.95 EUR:
  • Download and install OBDScope v1.60
  • You have seven days free trial period
  • Select OBDScope - Options - Activate product and check your product key. Please note that the key is case sensitive.
  • Enter the product key into the box below and press Buy Now button. You will be directed to PayPal to finish the payment.

    My OBDScope product key is
    		 OBDScope activation
    Click the image to see how to check
    your product key.

  • You will receive the activation key email in 24 hours

Alternative payment methods

  • Send the 9.95 EUR directly to PayPal address
  • Send a separate email containing your product key to the same address
  • You will receive the activation key email in 24 hours

  • If you don't want to use PayPal you can pay by committing an international money transfer to a bank account as well. Please contact with email for details.

Support


Documentation:


Remote logging reference server:


Frequently Asked Questions:

Buying and activation

  • Q: Does OBDScope work on my phone?
    A: Some of the compatible phones are listed on the Hardware page. OBDScope has the 7 day trial period. You can actually try it for free.

  • Q: What do I get more if I activate my copy of OBDScope?
    A: Basically all the features are included and enabled already in the trial version. Only the two features listed below are disabled. By activating OBDScope following changes will take place:
    • The 7 day limit will be removed
    • Clearing trouble codes will be enabled
    • The Shell interface will be enabled. Please see User's Guide for more information on the Shell.

  • Q: I don't have PayPal account and I don't want to create one. Is there any other method to pay?
    A: Yes there is. You can commit an international money transfer to a bank account. Please contact with email for details.

  • Q: I have paid for an activation key but I have not received it. What can I do?
    A: The activation key is usually delivered in 24 hours, so please be patient. The key will be sent to the email address defined on your PayPal account. Make sure you poll the correct inbox. If you have not received the key in time, please check your email spam folder, the key may appear there. The activation key will be sent only if you have provided your product key. Please make sure you send your product key with the payment.

  • Q: How is the activation handled if I change my phone?
    A: You may continue using OBDScope with the new phone without any extra cost. Just send both old and new OBDScope product keys to email address below. You will receive new activation key.

  • Q: I have recently rebooted/reset my phone and the activation I have bought does not work any more. What can I do?
    A: Please switch on Bluetooth before starting OBDScope. Usually this is helps.

  • Q: I have purchased OBDScope activation key, but I don't like OBDScope any more. Can I have my money back?
    A: No. We don't apply refund after the activation key has been sent.

Connection with an OBD Bluetooth interface

  • Q: I bought the cheapest OBD Bluetooth interface found in the eBay. The connection is not stable. Sometimes and with some vehicles I cannot connect at all. What can I do?
    A: You get what you pay for. By using one of the recommended interfaces with an OBDII/EOBD compliant vehicle there are no such issues. The recommended interfaces are listed in the User's Guide.

  • Q: The Bluetooth connection still disconnects occasionally. What can I do?
    A:
    • Update to version 1.60
    • Set the Speed up connection setting Disabled in General settings.
    • Make sure the OBD-II Bluetooth interface is firmly connected to the vehicle. The interface may get loosened while driving, which causes disconnection.
    • Make sure you use one of the recommended OBD-II Bluetooth interfaces.

Usage and features

  • Q: OBDScope shows there are DTCs. When I try to clear them they do not disappear. What can I do?
    A: Clearing DTCs should be done with engine not running and only ignition on. Some vehicles just ignore the clear command if the engine is running. So stop the engine, switch ignition on, reconnect OBDScope and try again. In addition, only the current and pending DTCs can be cleared. Permanent DTCs cannot be cleared. You should also note that clearing codes should be done only after fixing the actual fault that has caused the DTC to appear. If the fault is not fixed, the DTC can appear again right after codes are cleared. OBDScope always reads DTCs again automatically right after clearing the DTCs, so if the fault is not fixed it may seem like the DTCs has never been cleared.

  • Q: OBDScope shows incorrect reading for diesel fuel economy. What can I do?
    A: Please try calibrating the fuel economy reading. The calibration process is described in the User's Guide.

  • Q: Diagnosing a vehicle by selecting "Diagnose" from the main menu takes too long. What can I do?
    A: Set shorter "Lambda Test duration" and disable "Diagnosis location" from general settings.

  • Q: How can I see the turbo pressure?
    A: Turbo pressure is listed as "Intake manifold pressure". All vehicles do not support displaying Intake manifold pressure value. If you cannot see it with OBDScope then it is not supported by your vehicle. By default the unit of the gauge is kPa and shows the absolute pressure. You can switch it to bar or psi with right and left arrow keys or swipe left touch screen action. With bar and psi the pressure is shown as relative a.k.a. gauge pressure.

  • Q: How can I have multiple gauges visible at the same time?
    A: Open any gauge and then open a context menu by pressing the Enter key. Then select Layout from the context menu and set the number of gauges as you want. Then you may select the visible gauges with "Set gauge 1 to" -feature found in the context menu.

  • Q: My phone has a touch screen. How can I operate OBDScope gauges without a keypad?
    A: All the features are available with a touch screen as well. Tap down and hold on the upper half of a gauge to open a menu. Please see the User's Guide for complete description of touch screen features.

  • Q: Where can I find the enhanced PIDs listing for my vehicle?
    A: Enhanced parameters are usually vehicle manufacturer specific and the information required for defining new PIDs at Settings - User defined PIDs is not always publicly available. If you are lucky, you may find the required information from the web. Tmi OBDScope does not maintain lists of this information, and cannot provide any further details.

  • Q: Is it possible to transfer User defined PIDs from a phone to another?
    A: Yes it is. Just copy the file userpids.dat found in the obdscope folder on the selected storage.

  • Q: I have selected my language during installation, but OBDScope is still in English. What can I do?
    A: OBDScope language is set according to the phone language. Please select your language from phone settings and reinstall OBDScope.

  • Q: I want OBDScope in English, but I get it only in my own language. What can I do?
    A: Uninstall OBDScope, select English from phone settings and reinstall OBDScope. After that you may set any language as the phone language and OBDScope remains in English.

  • Q: Will software updates be free of charge for activated users?
    A: Yes, versions 1.xx will be free of charge for activated users.

  • Q: How can I read the Vehicle Identification Number (VIN)?
    A: VIN is available in Options - Vehicle info -dialog. The menu item is available only when the connection is established. VIN is also displayed as part of the diagnosis on the "Diagnosis" interleaf. However, reading VIN is not suported by all vehicles. If the VIN is not available it is not shown as part of a diagnosis and Vehicle info dialog shows N/A.

  • Q: I cannot see the Fuel Economy. Where is it?
    A: Fuel Economy reading is available with vehicles having MAF (Mass Air Flow) or MAP (Manifold Absolute Pressure) value available via OBD. If you don't see Fuel Economy in Gauges list, then it is not available. Average fuel economy feature can be set enabled or disabled at General settings.

  • Q: I cannot find any menu item for clearing DTCs. Where is it?
    A: Clearing DTCs and malfunction mndicator lamp (MIL) is available in activated version only.

  • Q: I think I found a bug in the software. How can I report it?
    A: You may generate OBD trace files with following instructions and send them to email address below:
    • Set OBDScope - Settings - OBD trace - Enabled
    • Run the software to get the error
    • Restart OBDScope
    • The trace file appears in \obdscope\obdtraces\ folder in the selected storage. See OBDScope - Settings - Memory selection for the selected storage.
    • Set OBDScope - Settings - OBD trace - Disabled

  • Q: I would like to have feature xyz included in OBDScope. Is that possible?
    A: Sure. Just email the suggestion to the address below and let's see what we can do.

E-mail:



Version history


1.60 Released on January 21st 2012 - Seven days free trial period. (Download) (Release Notes)
  • New feature: Romanian language support
  • New feature: Fuel used gauge
  • New feature: Fuel remaining gauge
  • New feature: Distance to empty tank gauge
  • New feature: Gauges for PIDs 0x53..0x64
  • New feature: USB connection type enabled with Symbian Belle phones
  • New feature: Power down OBDII interface when exiting the application
  • New feature: Swedish DTC descriptions and gauge titles
  • Improvement: More accurate diesel fuel economy tracking
  • Improvement: Increased font size in graph gauge
  • Fix: Connection stability with TX ERROR and DATA ERROR messages
  • Fix: DTCs containing hex numbers were not displayed correctly
  • Fix: Crash when sending Diagnosis SMS
  • Fix: Reading the Vehicle Identification Number (VIN)
  • Fix: Gauge context menu was not available with Symbian Belle phones
1.50 Released on February 17th 2011 - Seven days free trial period. (Download)
  • New feature: Greek language support
1.40 Released on January 28th 2011 - Seven days free trial period.
  • New feature: Engine power gauge (estimate)
  • New feature: Engine torque gauge (estimate)
  • New feature: Russian language support
  • New feature: Dutch language support
  • Improvement: Increased the maximum length of a DTC description in the database
  • Fix: Monitors were not resumed after closing the Shell
  • Fix: Average fuel economy did not work if odometer setting was disabled
1.31 Released on December 16th 2010 - Seven days free trial period.
  • Improvement: User extensible DTC description database
  • Improvement: Gauge update rate increased
  • Improvement: Include units to small gauges if possible
  • Improvement: Vertical lines to graph gauge
  • Improvement: Include engine coolant temperature to diagnosis
  • Improvement: Include all sub values to data logging output
  • Fix: Product activation issues
  • Fix: Wrong DTC description for non-P-codes
  • Fix: Only current DTCs will now cause failing inspection status
  • Fix: Gauge monitor was not triggered correctly if viewing another gauge
1.30 Released on October 28th 2010 - Seven days free trial period.
  • New feature: User defined (enhanced) OBD PIDs support
  • New feature: Brazilian Portuguese language support
  • New feature: Portuguese language support
  • New feature: PRC Chinese language support
  • Improvement: Spanish User's Guide
  • Improvement: Hide GPS gauges if GPS is not available
  • Improvement: Vehicle specific ECU filter setting
  • Fix: OBDKey 1.10 29bit CAN protocol support
  • Fix: DTC count -1 displayed in Saved diagnoses list
  • Fix: Receiving GPS signal
  • Fix: Swap lambda and equivalence ratio readings
  • Fix: AFR reading
  • Fix: New Favourite is lost if entering Settings after adding the Favourite
  • Fix: Wrong unit with third sub value of a gauge
  • Fix: Connection stability
1.21 Released on September 15th 2010 - Seven days free trial period.
  • Fix: Opening a favourite crashes OBDScope
  • Fix: Connection stability. Speed up connection -setting disabled by default.
  • Fix: OBDKey 1.10 support
1.20 Released on September 10th 2010 - Seven days free trial period.
  • New feature: Remote logging
  • New feature: Location support
  • New feature: French language support
  • New feature: Thai language support
  • New feature: AFR Gauge
  • New feature: Monitor gauges in background
  • Improvement: Open a Favourite directly at startup
  • Improvement: Gauge specific decimals setting
  • Improvement: 5 Gauge display
  • Improvement: 6, 7 and 9 Gauge display for screen resolutin larger than 240x320
  • Improvement: Removed null EqR and Lambda values from Oxygen sensor reading
  • Improvement: Different frequency tone for Gauge Alert high warrning
  • Improvement: Clear gauge alert settings with [clear] key and touch screen long tap
  • Improvement: Parameter identifiers added to Data Logging headers
  • Improvement: Speed up OBD data rate with ELM327 version 1.3 compliant interfaces
  • Improvement: Settings main page
  • Fix: Reading Freeze Frame data
  • Fix: Wrong unit after opening a Favourite
  • Fix: Graph freezes when value is out of bounds
  • Fix: Parameter description fixes
  • Fix: Wrong Timestamps with Logging 12 samples/second
1.11 Released on June 30th 2010 - Seven days free trial period.
  • Improvement: Automatic start of Data Logging
  • Improvement: U.S. units support
    • Improvement: Navigate between tabbed views with left/right sweep touch screen function
  • Fix: Crash when selecting "Diagnose" from main menu
  • Fix: Screen update when switching orientation
  • Fix: Removed unnecessary "Unable to read ECU." -message
  • Fix: CAN protocol issues
  • Fix: Removed compatibility warrning during installation
1.10 Released on June 10th 2010 - Seven days free trial period.
  • New feature: Average Fuel Economy
  • New feature: Calibration of the Fuel Economy reading
  • New feature: Lambda Tests
  • New feature: Gauge Favourites
  • New feature: Multi Gauge display
  • New feature: Graph Gauge
  • New feature: Mirrored Gauge
  • New feature: Spanish language support
  • Improvement: Read permanent DTC:s
  • Improvement: Show Finnish OBD inspection status
    • Improvement: Font size optimization for Gauge
  • Improvement: Better support for Fuel Economy reading
  • Improvement: Data Logging as background task
  • Improvement: Easier access to files saved on c: drive
  • Fix: Product activation issue
  • Fix: OBDKey + CAN protocol issue
  • Fix: PWM (Ford) protocol issue
1.00 Released on March 12th 2010 - Seven days free trial period.
  • New feature: Signed installation package
  • New feature: Finnish, German and Italian language support
  • New feature: Complete set of DTC descriptions for P0001-P0799 codes
  • New feature: Color setting for gauges
  • New feature: User defined gauge boundaries
  • New feature: User defined gauge alert boundaries
  • New feature: Visual alerts for gauges
  • New feature: Sound alerts for gauges
  • New feature: Odometer gauge
  • New feature: Fuel system status gauge
  • New feature: Units setting, Metric or Imperial
  • New feature: Example diagnosis
  • Improvement: Open previously saved diagnoses from all available disk drives
  • Improvement: More complete diagnosis SMS
  • Improvement: l/h and km/l units for Fuel Economy gauge
  • Improvement: Readiness for emission testing is shown as part of a diagnosis
  • Improvement: Supported standards is shown as part of vehicle info
  • Fix: OBDKey interface finally working
  • Fix: Freeze Frame data was not fetched correctly
  • Fix: Connection stability issues
  • UI fixes
  • Website update
0.24 Released on December 22nd 2009 - Expired on April 1st 2010.
  • Improvement: Easier access to OBD trace files
  • Improvement: Decimal separator setting
  • Fix: Some connection stability issues
  • Fix: OBDKey support
  • UI fixes
0.23 Released on Nov 15th 2009 - Expired on April 1st 2010.
  • Gauge: Disabled Fuel Economy gauge with diesel operated vehicles
  • Fix: Some connection stability issues
  • UI fixes
  • User's Guide
0.22 Limited release
  • UI fixes
0.21 Released on September 23rd 2009 - Expired on April 1st 2010.
  • Gauge improvement: psi unit support for pressure
  • Data logging improvement: 12/s sample rate
  • Data logging improvement: Removed extra zeros from file output
  • Data logging improvement: Progress information
  • Fix: Connection issues with multi frame messages
  • Fix: Mass storages are not listed on Settings
0.20 Released on August 28th 2009 - Expired on April 1st 2010.
  • New gauge: Fuel Economy
  • New gauge: OBD-II Port Voltage
  • Gauge improvement: Lambda value can be viewed while reading Oxygen sensor
  • Data logging improvement: Data to be logged can now be selected from a list of data items
  • Data logging improvement: More sample rates available
  • Data logging improvement: Cycle (sample) counter added
  • Fix: Better error handling while fetching DTCs
  • Fix: Freeze Frame data was not fetched correctly
  • Fix: 29bit CAN protocol was not working correctly
  • Various minor UI improvements
0.1.2 Released on May 6th 2009 - Expired on September 1st 2009.
  • The first public release
  • Easy to use User Interface
  • Supported protocols: PWM, VPW, ISO, KWP, CAN
  • Read Vehicle Identification Number (VIN)
  • Read diagnostic trouble codes (DTCs)
  • Show detailed description of the DTCs
  • Read Freeze Frame data
  • Read OBD-II Emission Test Statuses
  • Save diagnostic reports
  • Open previously saved diagnostic reports
  • Send diagnostic reports as SMS
  • Delete previously saved diagnostic reports
  • Clear DTCs and Check Engine Light (MIL)
  • Read live data, available in form of a generic gauge display
  • The data includes: Engine RPM, Vehicle speed, Engine Coolant Temperature, (all the standard parameters)
  • View min and max values
  • Reset min/max
  • Log data to a .csv file that can be opened with any spreadsheet application
  • The data items include the same parameters as with Gauges
  • Several Data Logging interval settings available
  • Command Bluetooth OBD-II Bluetooth interface with low level commands with a Shell User Interface
  • Save (trace) OBD-II communication to a file

Supported parameters


The data items that can be viewed with OBDScope Gauges are listed below. The same parameters apply also with Data Logging. The parameter list is vehicle specific. Only the parameters supported by the vehicle is shown by OBDScope.

Standard OBD-II parameters

  • Fuel system status
  • Calculated Load
  • Engine Coolant Temperature
  • Short Term Fuel Trim B1
  • Long Term Fuel Trim B1
  • Short Term Fuel Trim B2
  • Long Term Fuel Trim B2
  • Fuel Pressure
  • Intake Manifold Pressure
  • Engine RPM
  • Vehicle Speed
  • Timing advance
  • Intake Air Temperature
  • Air Flow Rate
  • Absolute Throttle Position
  • O2 Sensor B1S1
  • O2 Sensor B1S2
  • O2 Sensor B1S3
  • O2 Sensor B1S4
  • O2 Sensor B2S1
  • O2 Sensor B2S2
  • O2 Sensor B2S3
  • O2 Sensor B2S4
  • Time Since Engine Start
  • Distance with MIL
  • Fuel Rail Pressure Rel. To Manifold
  • Fuel Rail Pressure
  • O2 Sensor (L/WB) B1S1
  • O2 Sensor (L/WB) B1S2
  • O2 Sensor (L/WB) B1S3
  • O2 Sensor (L/WB) B1S4
  • O2 Sensor (L/WB) B2S1
  • O2 Sensor (L/WB) B2S2
  • O2 Sensor (L/WB) B2S3
  • O2 Sensor (L/WB) B2S4
  • Commanded EGR
  • EGR Error
  • Commanded Evaporative Purge
  • Fuel Level Input
  • Number Of Warm-ups Since DTCs Cleared
  • Distance Since DTCs Cleared
  • Evap System Vapor Pressure
  • Barometric Pressure

Standard OBD-II parameters

  • O2 Sensor (WB) B1S1
  • O2 Sensor (WB) B1S2
  • O2 Sensor (WB) B1S3
  • O2 Sensor (WB) B1S4
  • O2 Sensor (WB) B2S1
  • O2 Sensor (WB) B2S2
  • O2 Sensor (WB) B2S3
  • O2 Sensor (WB) B2S4
  • Catalyst Temperature B1S1
  • Catalyst Temperature B2S1
  • Catalyst Temperature B1S2
  • Catalyst Temperature B2S2
  • Control Module Voltage
  • Absolute Load Value
  • Commanded Equivalence Ratio
  • Relative Throttle Position
  • Ambient Air Temperature
  • Absolute Throttle Position (B)
  • Absolute Throttle Position (C)
  • Accelerator Pedal Position (D)
  • Accelerator Pedal Position (E)
  • Accelerator Pedal Position (F)
  • Commanded Throttle Actuator Control
  • Time with MIL
  • Time Since DTCs Cleared
  • Ethanol Fuel Ratio
  • Absolute Evap System Vapour Pressure
  • Evap System Vapour Pressure
  • Short Term Secondary O2 Sensor Fuel Trim B1
  • Long Term Secondary O2 Sensor Fuel Trim B1
  • Short Term Secondary O2 Sensor Fuel Trim B2
  • Long Term Secondary O2 Sensor Fuel Trim B2
  • Fuel Rail Pressure
  • Relative Accelerator Pedal Position
  • Hybrid Battery Pack Remaining Life
  • Engine Oil Temperature
  • Fuel Injection Timing
  • Engine Fuel Rate
  • Driver's Demand Engine Torque
  • Actual Engine Torque
  • Engine Reference Torque
  • Engine Torque Data

Non-Standard parameters

  • Average Fuel Economy
  • Momentary Fuel Economy
  • OBD Port Voltage
  • Odometer (OBDScope internal)
  • Trip meter (OBDScope internal)
  • Location
  • GPS speed
  • Air-Fuel-Ratio (AFR)
  • Engine power estimate
  • Engine torque estimate
  • Fuel used
  • Fuel remaining
  • Distance to empty tank